------------- Cập nhật máy REMAPTOOL -----------------------------

Bước 1: Kết nối REMAPTOOL vào máy tính bằng cáp cập nhật có sẵn (do Autoshop cung cấp)

Bước 2: Cài đặt phần mềm cập nhật "REMAPTOOL3_SETUP.exe"

Bước 3: Sau khi cài đặt xong phần mềm cập nhật, nhập vào nút " UPDATE " để cập nhật dữ liệu mới cho máy REMAPTOOL

Bước 4: Sau khi cập nhật xong, vào mục thông tin máy để kiểm tra lại phiên bản

------------- Cập nhật thẻ nhớ  --------------------------------

Bước 1: Tháo thẻ nhớ ra khởi máy REMAPTOOL và kết nối thẻ nhớ với máy tính qua cổng USB

Bước 2: Xóa toàn bộ dữ liệu cũ trong thẻ nhớ

Bước 3: Kiểm tra lại định dạng và dung lượng của thẻ nhớ, tùy theo máy 6 số hay máy 7 số thì định dạng sẽ khác nhau. Vui lòng xem lại hình ảnh " Format The Nho_SD CARD "

Bước 4: Copy toàn bộ dữ liệu trong thư mục "THE_NHO_REMAPTOOL_9_2025_SD_CARD" vào thẻ nhớ 


Một số lưu ý: 
- Dữ liệu thẻ nhớ cần tải chính thống từ website hoặc link do Autoshop cung cấp 
- Hãy chú ý chọn ngôn ngữ trước khi cập nhật
- Thẻ nhớ phải ở chuẩn định dạng và dung lượng
- Autoshop có video hướng dẫn cập nhật trên kênh youtube" Autoshop Việt nam"




--- ENGLISH -------------------------------------------

------------- Update REMAPTOOL -----------------------------

Step 1: Connect REMAPTOOL to the computer using the available update cable (provided by Autoshop)

Step 2: Install the update software "REMAPTOOL3_SETUP.exe"

Step 3: After installing the update software, enter the "UPDATE" button to update new data for REMAPTOOL

Step 4: After updating, go to the machine information section to check the version

------------- Update memory card --------------------------------

Step 1: Remove the memory card from the REMAPTOOL and connect the memory card to the computer via USB port

Step 2: Delete all old data in the memory card

Step 3: Check the format and capacity of the memory card again, depending on whether the machine is 6 digits or 7 digits, the format will be different. Please review the image "Format The Nho_SD CARD"

Step 4: Copy all data in the folder "THE_NHO_REMAPTOOL_9_2025_SD_CARD" to the memory card

Note:

- Memory card data needs to be downloaded from the official website or link provided by Autoshop

- Please pay attention to choose the language before updating
- The memory card must be in standard format and capacity
- Autoshop has a video tutorial on updating on the youtube channel "Autoshop Vietnam"